Nordictrack E7SV NTEL07808.0 User Manual

www.nordictrack.comModel No. NTEL07808.0 Serial No.________________Write the serial number in the space above for reference.Serial Number Decal (on

10. Attach the Right Pedal Arm (58) to the Right Pedal Bracket (64) with two M10 x 45mm Patch Screws (99).Repeat this step for the Left Pedal Arm (44

12. Attach the Water Bottle Holder (37) to the Upright (4) with two M4 x 16mm Screws (104).13. While a second person holds the Console (7) near the

HOW TO USE THE ELLIPTICAL EXERCISERHOW TO PLUG IN THE POWER ADAPTER HOW TO MOVE THE ELLIPTICAL EXERCISERPlug one end of the included power adapter int

HOW TO EXERCISE ON THE ELLIPTICAL EXERCISERTo mount the elliptical exerciser, hold the handlebars and step onto the pedal that is in the lower positio

CONSOLE DIAGRAMENDURANCEPERFORMANCEiODSTIMEEEH I5LImtraînerWORKOUTS(pnt V AWORKOUTS at ¡FIT.COMSiLENT MAGNETIC RESISTANCEWEIGEHT LOSS 2WElGFiT LOSS 3W

1. Begin pedaling or press any button on the console to turn on the console.A moment after you begin pedaling or press a button, a tone will sound,

5. Measure your heart rate if desired.If there are sheets of clear plastic on the metal contacts on the handgrip pulse sensor, remove the plastic. T

1. Begin pedaling or press any button on the console to turn on the console.A moment after you begin pedaling or press a button, a tone will sound,

1. Begin pedaling or press any button on the console to turn on the console.A moment after you begin pedaling or press a button, a tone will sound,

HOW TO USE AN IFIT WORKOUT HOW TO USE THE SOUND SYSTEM1. Begin pedaling or press any button on the console to turn on the console.A moment after you

TABLE OF CONTENTSWARNING DECAL PLACEMENT...

HOW TO CHANGE CONSOLE SETTINGS 3. Select a unit of measurement if desired.The console features a user mode that allows you to select a unit of measure

MAINTENANCE AND TROUBLESHOOTINGInspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately.To clean the el

EXERCISE GUIDELINESik<igmWARNING: Before beginningthis or any exercise program, consuit your physician. This is especiaiiy important for persons ov

PART LIST-Model No. NTEL07808.0R1008AKey No.Qty. DescriptionKey No.Qty. Description1 1Frame 512 Roller2 1Base52 2Pedal Arm Cap31 Ramp53 8 Axle Cover4

Key No.Qty. DescriptionKey No. Qty.Description1012 M8 X 20mm Washer110 1 Upper Wire Harness102 12 M8 Locknut 111 1Lower Wire Harness1031 M3.5 X 12mm F

EXPLODED DRAWING A-Model No. NTEL07808.0R1008A

EXPLODED DRAWING B-Model No. NTEL07808.0R1008A26

EXPLODED DRAWING C-Model No. NTEL07808.0R1008A27

ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provi

IMPORTANT PRECAUTIONSWARN ING I To reduce the risk of serious injury, read aii important precautions and instructions in this manuai and aii warnings

BEFORE YOU BEGINThank you for selecting the new NordicTrack® E7 SV FRONT DRIVE elliptical exerciser. The E7 SV FRONT DRIVE elliptical exerciser provid

ASSEMBLYAssembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose

1.To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser.Attach the Front Stabilizer (6) to the

4. Apply a small amount of the Included grease to the right Crank Arm (20) and to a 19mm Wave Washer (66).Slide a Crank Arm Spacer (55) and the 19m

6. Identify the Right Handlebar (61) and the Right Handlebar Leg (60), which are marked with “Right” stickers, and orient them as shown. Make sure th

8. Attach an Outer Handlebar Cover (67) and the Inner Handlebar Cover (68) around the Right Handlebar Leg (60) with two M4 x 16mm Screws (104).Repeat