NordicTrack 25049 Owner's Manual

Serial Number DecalModel No. 831.25049.1Serial No. Write the serial number in the space above for reference.

104. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) with two 3/8&quo

11681908986E86281111286. Attach a Handrail (86) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washe

1288. Set the console assembly (F) face down on a soft surface to avoid scratching the console assembly. Remove and save the four 1/4" x 1/2&qu

1310. Insert the Upright Wire (81) through one looped tie (I) and insert the console wire through the other tie on the console assembly (F). See t

14126434361112. Identify the Right and Left Trays (34, 36). Attach the Trays (34, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1)

1514. Attach the Tray (74) to the Upright Crossbar (58) with four #8 x 3/4" Truss Head Screws (23); start all four Truss Head Screws, and then t

1616. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. I

1718. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (38). Align the upper end of th

18202626105FMStart First20. Press the two tabs (not shown) on the Tablet Holder (105) into the slots (M) in the console assembly (F). Then, attach

19HOW TO USE THE TREADMILLHOW TO CONNECT THE POWER CORDUse a Surge SuppressorYour treadmill, like other electronic equipment, can be damaged by sudden

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20FEATURES OF THE CONSOLE The treadmill console offers an array of features de-signed to make your workouts more effective and enjoyable. When you use

21HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before you turn on

225. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons or on

23 To measure your heart rate, stand on the foot rails and hold the pulse bar with your palms on the metal contacts; avoid moving your hands. When yo

245. Follow your progress with the displays. See step 6 on page 22. If you select an onboard workout, the display will show the time remaining ins

25HOW TO CONNECT YOUR SMART DEVICE TO THE CONSOLEThe console supports BLUETOOTH connections to smart devices via the iFit app and to compatible heart

26HOW TO USE THE SOUND SYSTEMTo play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio

27HOW TO USE THE TABLET HOLDERIMPORTANT: The tablet holder is designed for use with most full-size tablets. Do not place any other electronic device o

28FCC INFORMATIONThis console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

29 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to zero before you fold the treadmi

31. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.2. Befo

30MAINTENANCE AND TROUBLESHOOTINGMAINTENANCERegular maintenance is important for optimal perfor-mance and to reduce wear. Inspect and properly tighten

31SYMPTOM: The incline of the treadmill does not change correctlya. Hold down the Stop button and the Speed increase button, insert the key into th

32b. If the walking belt slips when walked on, fi rst remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws cloc

33EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

34 Key No. Qty. Description Key No. Qty. DescriptionPART LISTModel No. 831.25049.1 R1015A 1 19 #8 x 1/2" Screw 2 31 #8 x 3/4" S

35 Key No. Qty. Description Key No. Qty. Description 101 1 Fan 102 2 Hood Mount 103 2 Shipping Support 104 1 Electronics Bracket 105 1

36311113951511235361238391649562024245460471230596554619214510310323101048615123059611530125961946434244211230591414571001061001062339113913951142 211

376610768102102268759922104657222522785151516868269232323273683329701633326767107353510771333371EXPLODED DRAWING BModel No. 831.25049.1 R1015A

3893171733778133941071071313132222976262873763829197838990979791811091087136371313728289595111113142385798695427274111123 842387142386749211315831112

39252541415299643611011311111211622511421111622650115115115115115211611611212115115115134188098296101296101105EXPLODED DRAWING DModel No. 831.25049.1

419. Always stand on the foot rails when starting or stopping the walking belt. Always hold the handrails while using the treadmill.20. When a person

Part No. 374395 R1015A Printed in China © 2015 ICON Health & Fitness, Inc. ICON Health & Fitness, Inc. (ICON) warrants this product to be fre

5 all STANDARD SERVICE PLANS

6Thank you for selecting the revolutionary NORDICTRACK® C 970 PRO treadmill. The C 970 PRO treadmill offers an impressive selection of fea-tures desig

7PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-ing is the key

8ASSEMBLY• Assembly requires two persons.• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materi

922. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Ri