NordicTrack 25049 Owner's Manual download pdf (Page 11)

6. Attach a Handrail (86) to the Right Upright (90)

with two 5/16" x 2 1/2" Screws (28) and two

5/16" Star Washers (11); do not fully tighten

the Screws yet. Make sure not to pinch the

Upright Wire (81), and make sure that the

wire is on the indicated side of the Upright.

Attach the other Handrail (86) to the Left

Upright (89) in the same way. Note: There are

no wires on the left side.

Then, remove and discard the indicated screws

(E).

7. IMPORTANT: To avoid damaging the Pulse

Crossbar (93), do not use power tools and do

not overtighten the #10 x 3/4" Screws (9).

Orient the Pulse Crossbar (93) as shown. Attach

the Pulse Crossbar to the Handrails (86) with

four #10 x 3/4" Screws (9) and four #10 Star

Washers (5); start all four Screws, and then

tighten them.

Next, firmly tighten the four 5/16" x 2 1/2"

Screws (28).

Then, remove the wire tie (A) from the Upright

Wire (81).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

NordicTrack 25049 Owner's Manual Page 11