Nordictrack NTSA03990 User Manual

CAUTIONRead all precautions and instruc-tions in this manual before usingthis equipment. Save this manualfor future reference.Model No. NTSA03990Seria

1016. Wrap the High Cable (73) around a 4” Pulley (35) inthe direction shown and attach the Pulley to the TopFrame (1) with a 3/8” x 2 1/2” Bolt (54),

111313. Loosen the 1/2” Plain Nut (68) on the bolt at the endof the High Cable (73). Detach the bolt from the topof the Weight Tube (36) and the Long

1219. Attach the Backrest (134) to the Seat Frame (106)with four 1/4” x 3/4” Bolts (130).18. Open the parts bag labeled “SEAT ASSEMBLY.”Attach the Sea

13AdjustmentUsing the Leg Press AccessoryAdjusting the SeatTo adjust the position of the Seat Frame (106), unscrewthe handle of the Adjustment Knob (1

14Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. 101 1 Press Base102 1 Press Frame103 1 Base Support

151081071241201221201241241101131161221201181151121121241181171251181261201331271221151181181101131161201181201191231161131131211161181321321301121311

Ordering Replacement PartsTo order replacement parts, simply call our Customer Service Department toll-free at 1-888-825-2588, Mondaythrough Friday, 6

2Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3WARNING: Before beginning this or any exercise program, consult your physician. Thisis especially important for persons over the age of 35 or persons

43/8" x 2" Bolt (121)3/8" Flat Washer (120)1/4" x 3/4" Bolt (130)3/8" Nylon Locknut (118)3/8" x 3 1/4" Bolt (1

5AssemblyMake sure you have the following tools:• Two adjustable wrenches• One rubber mallet• You will also need grease or petroleum jelly, asmall a

62. Remove the inner cap and the four hole plugs fromthe end of the stabilizer.Secure the Base Support (103) to the stabilizer withtwo 3/8” x 2 3/4” B

74. Slide the Press Frame (102) into the Seat Frame(106). Press a 2” Square Inner Cap (112) into the indicatedend of the Press Frame (102). Press a 2

810. Wrap the Cable (133) around a 4” Pulley (113) andattach the Pulley and a Cable Trap (116) to the PressFrame (101) with a 3/8” x 3 3/4” Bolt (110)

913. Locate the Pulley Bracket (91), one 1/4” Flat Washer(71), and one 1/4” Nylon Locknut (25) that came withyour weight system. Attach the end of the